Group Admins
Introductions
Public Group active 4 months, 2 weeks agoWhat’s your name and where do you come from? And what bike(s) do you have?
-
Andrew Frame joined the group
Introductions 4 months, 2 weeks ago · View
-
Raymond Garand joined the group
-
Dave Finch started the forum topic 30:1 mix for 1973 2 stroke engine in the group
Getting very confused about what mix ratio is applicablemy bike takes 30:1 mix , however I would presume the mix refers to gallons and not litresif so what ratio /amount of 2 stroke oil do I use for 1 gallon of unleadedany ideas ?
-
Dave Finch joined the group
-
Russ joined the group
-
Steve Sewell joined the group
-
Martyn Turner joined the group
-
Burton Bike Bits joined the group
-
stuart urquhart joined the group
-
Bert joined the group
-
posted on the forum topic Timing in the group
Gary earlier posts I sent you are not appearing? However forgot to say you only need to time using the alternator rotar with outer primary casing on and inspection plate removed – there should be a pointer for static timing then use the strobe too check that the (paint white!) marked rotar line aligns with [...]
-
Garry Dodds posted on the forum topic Paint or powder-coat in the group
I believe that is a personal thing for every body to think about. Do you keep it in it’s original state, that is as it came from the factory. Ask your Powder Coater to plug the holes so you don’t have to re clean the threads, as they do have the means to do it. [...]
-
posted on the forum topic Paint or powder-coat in the group
Stove enamelling is another option. This also produces are hard coat, but I think you are limited in colour choice. I stove enamelled my Ariel Sq 4 way back in 1986 & the paint is still reasonably good inspite of the bike parked out for 15 years in the mumbai monsoons. Where can I see [...]
-
posted on the forum topic Paint or powder-coat in the group
Hi Dan, love your Ariel by the way – I have a 1939 Red Hunter which I have just restored. I had the hubs and cycle parts powder coated and the finish is much more durable than the painted frame. I now wish I had powder coated the frame as small chips are annoying. My [...]
-
Dan Talbot started the forum topic Paint or powder-coat in the group
-
gennaro terlizzi started the forum topic hello chaps owners of royal enfield in the group
-
Garry Dodds started the forum topic Timing in the group
Hello fellow BSA riders and Collectors. I have a 1966 BSA and Im having trouble timing it after installing a Boyer ignition. When i strobe the bike where do i line up the timing marks.It has one on the Rotor but is the other one on the side casing?
-
mike webber started the forum topic searching for a kick start mechanism for a bsa 350 b31 1957 model in the group
-
Ole Sletner started the forum topic Triumph TRW in the group
-
Bertil van den Nieuwboer started the forum topic New Member. Hi in the group
- Load More